top of page
Search

Paver Sealing Tips for Waterfront Homes in Oakhurst Shores

  • psalmisraelcallejo
  • 5 hours ago
  • 3 min read

Oakhurst Shores, FL, is a sought-after waterfront community where stunning views and outdoor living go hand-in-hand. Many homes in the area feature brick paver driveways, patios, walkways, and pool decks that extend the beauty of the property to the shoreline. But while these pavers add charm and value, being close to the water brings a unique set of challenges—especially when it comes to long-term maintenance.


Waterfront properties in Oakhurst Shores are exposed to salt air, moisture, sun, and sand—all of which can cause rapid deterioration of unsealed brick pavers. That’s why routine cleaning and sealing is a must for protecting your hardscapes and preserving your home’s aesthetic.


At Premier Coatings, we specialize in sealing pavers for Florida’s coastal homes. Below, we share our expert tips to help Oakhurst Shores residents protect their pavers and enjoy a more beautiful, durable outdoor space year-round.


Why Sealing Matters More for Waterfront Properties

Waterfront homes endure more environmental exposure than inland homes. This constant exposure creates several specific problems for unsealed pavers:

  • Salt intrusion can break down the surface of brick pavers, leading to pitting, fading, and structural weakening.

  • Moisture retention causes mold, mildew, and algae—especially in shaded or wind-sheltered areas.

  • UV rays bleach color from pavers and dry out the surface, making them brittle.

  • Sand and debris from breezes or foot traffic grind into the paver surface and joints.

  • Stormwater runoff accelerates erosion, especially in low-lying or sloped parts of your yard.

Sealing creates a protective barrier against all of these issues, significantly extending the lifespan and appearance of your pavers.


Tip #1: Always Clean Before You Seal

Sealing over dirty pavers locks in surface stains, mold, and residue. To ensure a strong bond and clean finish, pavers must be thoroughly cleaned before any sealer is applied.

Professional cleaning should:

  • Remove salt buildup and airborne pollutants

  • Lift algae, mildew, and mold from the surface and joints

  • Eliminate tannin stains from nearby trees or mulch

  • Strip away old sealer if it's peeling or flaking

Premier Coatings uses rotary surface cleaners and eco-safe treatments to deep-clean pavers without damaging them or nearby landscaping.


Tip #2: Choose a Sealer Formulated for Coastal Conditions

Not all sealers are created equal—especially when dealing with salt exposure and high humidity. Waterfront homes in Oakhurst Shores need a high-performance, breathable sealer that can resist:

  • Saltwater corrosion

  • UV rays

  • Water intrusion

  • Algae and mildew growth

We apply sealers specifically designed for coastal Florida environments. These penetrate deep into the paver surface while allowing moisture to escape, which prevents bubbling or peeling after heavy rains.


Tip #3: Select the Right Finish for Your Lifestyle

The finish of your sealer not only affects appearance but also influences cleaning and wear resistance. At Premier Coatings, we offer two finishes suited for waterfront homes:

Natural Matte Finish

  • Preserves the paver’s natural tone and texture

  • Ideal for shaded or heavily trafficked areas

  • Less glare in direct sun

  • Hides dirt and dust more easily

Wet-Look Gloss Finish

  • Deepens color and gives a high-end, polished appearance

  • Ideal for entertaining areas, patios, and entryways

  • Easier to rinse clean in sand-prone locations

Both finishes provide full protection—your choice depends on visual preference and how the space is used.


Tip #4: Don’t Forget Joint Stabilization

Salt air and rain slowly wash out the sand between your pavers. Without stabilized joints, your pavers may shift, weeds may grow, and water can pool between them.

Before sealing, we re-sweep the joints with a special silica sand mix that resists erosion and helps lock the pavers in place. Sealing then hardens this joint material, keeping it stable and reducing maintenance needs.


Tip #5: Reseal Every 2–3 Years

Even the best sealer wears down over time—especially in salt-heavy, moisture-rich environments like Oakhurst Shores. For maximum protection, we recommend:

  • Resealing every 2 to 3 years

  • Cleaning more frequently if your pavers are near the seawall, dock, or pool

  • Inspecting after storms or flooding for joint erosion or surface fading

If your pavers start to look dull, chalky, or uneven—it’s probably time to clean and reseal.


Why Oakhurst Shores Homeowners Trust Premier Coatings

We work with coastal homeowners across Pinellas County and understand the specific care that waterfront hardscapes require. Our services are designed to protect your pavers against salt, sun, stormwater, and erosion—while bringing out the best in your home’s exterior.


With Premier Coatings, you get:

  • Licensed and insured professionals

  • Eco-friendly, pool-safe cleaning agents

  • Coastal-grade sealers for maximum durability

  • Experienced application and surface prep

  • Clear pricing, honest service, and beautiful results


Protect Your Pavers—And Your Investment

If you live in Oakhurst Shores and haven’t sealed your pavers recently—or ever—it’s time to take action. Sealing is one of the best ways to protect your outdoor surfaces from coastal wear, improve safety, and elevate the curb appeal of your home.

📞 Call 727-237-5953

Premier Coatings is proud to serve waterfront homeowners with professional paver care that lasts.

 
 
 

Comments


Featured Posts
Check back soon
Once posts are published, you’ll see them here.
Recent Posts
Archive
Search By Tags
Follow Us
  • Facebook Basic Square
  • Twitter Basic Square
  • Google+ Basic Square

Premier Coatings © 2025

bottom of page